Cannabis Hardware has added a new dry pipe accessory to its lineup of premium cannabis consumption devices.
The Haze Pipe is designed to fit the FlowerPot ball vapes as well as the ZenLeaf line of cordless ball vapes. The futuristic milled aluminum and glass look matches and mounts perfectly with the ZenLeaf desktop vaporizer housings.
The Haze Pipe is $253 for the balled 3-piece stem version like mine and $198 for the simpler 2-piece version.
Code TROYTIME will save you 5% off the Haze Pipe or anything from Cannabis Hardware.
Cannabis Hardware is an American manufacturer of high-quality products for the cannabis connoisseur.
Haze Pipe Demo Video
The Haze Pipe is surprisingly cool and smooth to hit. The vapor still has enough heat to hurt if you hit it hard, but the balls cool the vapor significantly.
The Haze Pipe feels great in the hand and seats perfectly into the ZenLeaf housings.
To be completely honest I was worried that vapor from the Haze Pipe would be too hot, but the ruby balls in the stem take a tremendous amount of heat from the vapor.
Ball Vapes are the most powerful dry herb vaporizers available and they’re almost exclusively used on a bong because the vapor is just too hot for the human mouth.
Vapor through the Haze Pipe is still hotter than it would be through a water bong, but it’s also tastier than it would be through a bong. Water filters more flavor than ruby balls!
Having a dry piece has advantages
Water bongs should be cleaned daily. Dry pieces can go weeks without cleaning.
This Haze pipe will be perfect for my wake and bake when my coffee is ready but I haven’t cleaned my bong yet.
It’s also considerably more portable than a full water bubbler setup. The ZenLeaf and haze Pipe can be surprisingly mobile with a DC converter. Cannabis Hardware will surely release drill-battery-powered ZenLeaf housing soon.
Haze Pipe Cleaning
After vaping 6 bowls the screen became quite clogged and required cleaning. The Haze Pipe came with a dual-weave titanium screen, which is known for getting gunked up. I’ll most likely replace this screen with a standard mesh screen soon because the dual-weave screen gets dirty fast.
The balls in the cooling stem are noticeably more restricted after 2 or 3 bowls. As THC reclaim accumulates in those balls the airflow will get tighter and tighter.
Tell me your thoughts
I’m not posting this video to YouTube, so please share this post wherever it’s relevant and leave your comments here on this page.
I like cannabis hardwares stuff but the price gouging turns me off at times. For instance, why is Mary or Jane $233, while a shovelhead bowl with similar matching and same metal cost $60? If I want to own Mary and Jane it’ll set me back a whopping 464$. Shits bananas.
Agreed! Let’s make 5 different ZenLeaf machines then let the customer deal with all the I perfections all while using the customers money to rape us! Why do you have to buy 2 Mary Jane’s if you have a different bowl. You think they have an adapter for that price or the bottom screws off. Plus you buy the Hammer and it doesn’t retain the heat so you have to now buy pearls to actually make it work better or more proficient all while I be they will come out with a new hammer wanting us to spend more.
Example we all have the stands, why not make a post to buy where the post screws in the coil which we all have 25mm axial coils because we spent the money for concentrates with the Bzero which is by far more efficient than the ZenLeaf.
Get rid of the BS titanium metal screen and replace it with a thin titanium screen. You need 4mm pearls and 3mm pearls to help adjust with the lack of heat retention. I have to use Temps over 600F for dry and consistently have to fill thr bowl with .5g so the materials cook evenly otherwise illnhave uneven cooks.
Again the company uses us the consumers to experiment on us. Instead of gathering data from the customers they just don’t listen. It took how long and complaining on their discord to get a Bzero as the community would absolutely run you out of their discord because God forbidden you actually have good ideas instead of the Homer’s telling the customers how great and how they don’t need to change or how us customers are wrong.
For this amount of money, which you never need to spend just make your own. Be nice if they actually cared and used the same products they make so the customer doesn’t have to shell out $300-400 on a new machine then having to spend more money on it to get the proper screen and pearls.
SHAME ON YOU CANNABIS HARDWARE! Shame on using customers money and passing it in the wind!
Sure you make ok products but you keep changing your main base on the backs of the consumers!
Why haven’t you used the Auber case and have the echo screw into the Auber case. Now you don’t offer it and we are handcuffed to the crappy Nova or New Vape PID which sucks! Too bright, buttons sucks and no programed Temps!
Guys stick with the Echo save money! I bought the Nova and hate it! I kept it because i had to male shift the hammer or Mary Jane.
BZERO great job but took way too much of the customers complaining to actually get that going. Now they see the terp hammer and want to jump on that train. That’s fine but stop using us as the experiment get your products right the 1st time and not on the expense of us.
I’m no Homer and I review with honesty!
Did a similar w/ the SB Runt using 3mm rubies. It worked out smooth as can be. Waiting on bigger rubie balls for the OG. It’s a cost effective app w/ the wood aesthetics.
I know–the pricing really puts me off, yet their collections are so nice…
I have been using the Runt with a few different ballers over the past couple of years, and I truly praise the value. It offers complete one-hit extractions, seemingly a “best” convection effect and easy setup. After a period of trials, the cost wears off.
As for this device being honest has potential, though knowing Cannabis Hardware they will come out with a special stand for it that you have to buy because it won’t fit on any of their stands they make now. I’m joking, but am I? Need more reviews not spending money on this cause I already spent money on the Nova and should have gotten the Echo but Echo came out later lol. Plus reason I went with Nova was its all self contained in 1 unit, plus for folks who have bad arthritis making it easier for them to smoke. It’s not perfect for sure but again for the amount of money go with cheapest cause there are too many adjustments you have to make with the hammer to justify the costs they are selling it
I love the concept here. It’d be awesome to see it with a different visual aesthetic. Maybe an Old Head wooden pipe edition?
As far as switching screens, won’t that lead to more frequent cleaning of the balls? How involved is it to disassemble?
Hey, Troy. Before I grab one of these I wanted to ask….is it as shallow as the shovelhead? I got a shovelhead when I ordered my Bzero and barely ever use it because I can only put a tiny amount of herb in before the bzero head is touching the herb in the bowl which is no bueno. If that is the case I may hold off until I get a cordless b1/b2 type head. Thanks!!
Was skeptical about this but just ordered one. I get a lot of people complain about the price but they have the best looking setups out there. Use high quality materials and machining isn’t cheap. I say if you don’t like the spending money there are plenty of other companies out there that make a decent product for less. I prefer the more premium materials they use personally don’t care what they price it at.
Word to the wise: Instead of buying the Haze for hundreds of dollars……Buy 15 or 20 6-mm ruby balls on Amazon, pour them into a standard 14-mm dropdown. I’ve been using this vapor cooler adaptor for a few weeks now with my regular glass bongs as a dry vape using the FlowerPot and couldn’t be happier. I feel the taste AND the effect are preferable with dry vaping vs through water, but always too hot dry. Until now! you can have the Haze pipe experience for a lot less by just buying the balls and using a standard dropdown. I’m delighted by this discovery, use it every day with my flowerpot vape setup.
I’m loving the concept of the dry pipe for ZenLeaf and Flowerpot vaporizers! As a frequent user of these devices, I can attest to the importance of proper cooling and vapor quality. The Haze Pipe by Cannabis Hardware looks like a game-changer in this department. Can’t wait to give it a try and see the difference it makes in my vaping experience!
I want to try this before I buy it. It’s kinda pricey, but I’ve had nothing but good luck with CH products. I have a B2 head and a shovelhead now. Using through water. It does the job for sure.
It is pricey! You can certainly make your own glass version to experiment with and get a feel for it. I really like how the Haze Pipe stores/mounts to the Zenleaf housings